{"title":"Precision lathe and milling systems","description":"","products":[{"product_id":"precision-lathe-fd-150-e","title":"Precision lathe FD 150\/E","description":"\u003cstrong\u003e2-stage belt drive and additional electronic control enables spindle speeds up to 5,000rpm. The right cutting speed for even the smallest pieces. For face turning, longitudinal turning, boring, taper turning, slicing and drilling. Complete with 3-jaw chuck and live centre. Centre distance 150mm. Swing 55mm. Height over cross slide 33mm.\u003c\/strong\u003e 2-stage belt drive and additional electronic control enables spindle speeds up to 5,000rpm. The right cutting speed for even the smallest pieces. For face turning, longitudinal turning, boring, taper turning, slicing and drilling. Complete with 3-jaw chuck and live centre. Centre distance 150mm. Swing 55mm. Height over cross slide 33mm.\\n\\nMachine bed with dovetail guides of continuous casting aluminium.\\n\\nDie-cast aluminium spindle headstock. With quiet special DC motor, 2-stage belt drive and additional electronic speed control for high engine power at low speeds for larger work pieces and for the appropriate cutting speed, even for the smallest pieces. Main switch with emergency stop function and restart protection. Precision bearing mounted main spindle with continuous 8.5mm bore. Chuck fit for standard ER 11 type collets.\\n\\nThree-jaw chuck, self-centering. Inside jaws 1.5 - 32mm, outside jaws 20 - 50mm.\\n\\nDie-cast aluminium tailstock with spindle and live centre (fitting MK 0\/ short).\\n\\nSupport: To be shifted manually on the bed and clamped with lever. Rotating tool post for turning steels 6 x 6mm. Processing via top slide (60mm, travel distance Z) and cross slide (40mm, travel distance X). The angle adjustment of the upper carriage makes it possible to turn tapers up to +\/- 45?.\\n\\nHandwheels with zero adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm).\\n\\nOther technical data:\\n230V. 50\/60Hz. Distance between centres 150mm. Swing 55mm. Height over cross slide 33mm. Cross slide travel (X) 40mm, top slide travel (Z) 60mm. Steel tool post for turning steels 6 x 6mm. Spindle bore 8.5mm. 2-stage belt drive with electronic speed control: Stage 1 = 800 - 2,800rpm. Stage 2 = 1,500 - 5,000rpm. Dimensions approx. 360 x 150 x 150mm. Weight 4.5kg. Insulated to class 1.","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297852461440,"sku":"P-24150","price":582.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24150_RGB.jpg?v=1781878931"},{"product_id":"parallel-supports-set","title":"Parallel supports set (14-piece)","description":"\u003cp\u003e14-piece parallel supports set\\nGround in pairs. For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 - 62 HRC). Parallel accuracy 0.02mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297860260224,"sku":"P-24266","price":118.49,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24266_RGB.jpg?v=1781878957"},{"product_id":"4-jaw-chuck-with-independant-jaws-o-75-mm-for-pd-250-e","title":"4-jaw chuck with independant jaws Ø 75 mm for PD 250\/E","description":"\u003cp\u003e4-jaw chuck with independent jaws\\nFor clamping angular and asymmetrically shaped work pieces. Capacity up to 80mm. Chuck ? 75mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297860358528,"sku":"P-24036","price":163.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24036_RGB.jpg?v=1781878958"},{"product_id":"chip-collecting-tray-for-proxxon-milling-machines","title":"Chip collecting tray for PROXXON milling machines","description":"\u003cp\u003eAccessories for the FF 500\/BL\\n\\nSplash guard and chip collecting tray for PROXXON milling machines\\nMade of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.\\n\\nSuitable for FF 230, FF 400, FF 500, FF 500\/CNC, FF 500 - ready for CNC, FF 500\/BL, FF 500\/BL-CNC and FF 500\/BL-CNC-ready as well as for mill\/drill unit BFB 2000 and compound table KT 150.\\n\\nNote: The milling machine depicted here is not included.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297861210496,"sku":"P-24322","price":227.27,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24322_RGB.jpg?v=1781878961"},{"product_id":"individual-quick-change-holders-for-pd-250-e","title":"Individual quick-change holders for PD 250\/E","description":"\u003cp\u003eAdditional quick change tool holder (separately)\\nCan be used with the above above-mentioned quick change tool post.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297861505408,"sku":"P-24024","price":25.28,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24024_RGB.jpg?v=1781878963"},{"product_id":"precision-lathe-pd-400","title":"Precision lathe PD 400","description":"\u003cp\u003eCentre distance 400mm. Swing 85mm. Height over cross slide 58mm. For machining steel, brass, aluminium and plastic. For face and straight turning, taper turning and thread cutting. With an extensive range of system accessories you can also drill, mill and slot.\\n\\nMachine bed: Of high quality cross-braced cast iron with wide-legged, prism slides. For vibration-free work even at high loads. With flange and threaded holes at back for fastening the drill and mill head PF 230. Covered lead spindle.\\n\\nHeadstock: Of die-cast aluminium. Oversized main spindle with two adjustable taper roller bearings and MK 3 bore on chuck side. Spindle bore 20.5mm. Run-out without chuck 1\/100mm. Rotary switch for engaging the automatic feed (optionally 0.07 and 0.14mm\/rev.). Lead and feed spindle with trapezoid threading (12 x 1.5mm).\\n\\nTailstock: Of die-cast aluminium. Sleeve ? 24mm, retractable up to 40mm. With mm scale. With live centre MK 2 and 10mm gear tooth chuck (B 12 - bore\/MK 2).\\n\\nSupport: Bed carriage made of die-cast zinc. Cross slide (adjustment 85mm) and top slide (setting range 52mm) of steel. Top slide can be swivelled for taper turning (degree graduation up to 45? available). With multiple tool posts and two tool post elements for quick change and easy height adjustment. For turning tools 10 x 10mm.\\n\\nDrive: Powerful capacitor motor for two speeds and additional threestage belt drive. Spindle speeds at stage 1: 80 - 330 - 1,400rpm. For stage 2: 160 - 660 and 2,800rpm.\\n\\nLathe chuck: High quality 3-jaw chuck as per DIN 6386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing chucks 3 - 100mm. Including lathe chuck guard with safety shutdown.\\n\\nHandwheels: Of aluminium, with scale ring adjustable to 0. For cross slide and top slide: 1 division = 0.025mm. 1 rev. = 1mm. For tailstock and lead spindle: 1 graduation line = 0.05mm. 1 rev. = 1.5mm.\\nSupport quick adjustment: By means of large handwheel fastened to bed by toothed rack.\\n\\nThread cutting device: For left-hand and right-hand thread. With change gears for 19 different metric pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1 - 1.25 - 1.5 - 1.75 - 2 - 2.5 - 3mm. Also for inch threads from 10 - 48TPI.\\n\\nOther technical data:\\n230V. 50\/60Hz. Size L 900, W 400, H 300mm. Weight approx. 45kg. Motor rated input 870W, power output 550W, motor speeds 1,400 \/ 2,800rpm.\\n\\nA tool holder with two adjustable inserts is included as standard.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297865929088,"sku":"P-24400","price":2944.92,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24400_RGB-1.jpg?v=1781878973"},{"product_id":"centre-turning-attachment-for-pd-250-e","title":"Centre turning attachment for PD 250\/E","description":"\u003cp\u003eCentre turning attachment.\\nFor highest accuracy with high rotational precision.\\nThis includes: 1 face plate, 2 fixed centres (MK 2 and MK 1\/short) and 1 drive dog. Packed in a wooden box.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297865994624,"sku":"P-24014","price":99.23,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24014_RGB.jpg?v=1781878974"},{"product_id":"splash-guard-and-chip-collection-tray-for-pd-250-e","title":"Splash guard and chip collection tray for PD 250\/E","description":"\u003cp\u003eChip collecting tray with splash guard\\nMade from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow slight clean-ing. Mounting hole and raised base to secure lathe are pre-drilled. L 550 x W 240 x H 160mm. The depicted lathe is not included in the offer.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297866224000,"sku":"P-24008","price":172.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24008_RGB.jpg?v=1781878975"},{"product_id":"collet-set-with-er-20-collets-for-pd-250-e","title":"Collet set with ER 20 collets for PD 250\/E","description":"\u003cp\u003eCollet set with ER 20 collets:\\nFor extreme true concentric accuracy. 2 - 10mm.\\nFor high precision machining of round parts. The collet set is mounted instead of the lathe chuck. With 8 collets (2 - 2.5 - 3 - 4 - 5 - 6 - 8 and 10mm). Packed in a wooden box.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297866322304,"sku":"P-24038","price":163.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24038_RGB.jpg?v=1781878977"},{"product_id":"fine-feed-for-milling-machine-pf-230-250-and-micro-miller-ff-230-250","title":"Fine Feed for Milling machine PF 230\/250 and Micro Miller FF 230\/250","description":"\u003cp\u003eEasily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297870614912,"sku":"P-24140","price":118.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24140_RGB.jpg?v=1781878996"},{"product_id":"travelling-steady-for-pd-400","title":"Travelling steady for PD 400","description":"\u003cp\u003eFitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum ? 50mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297871729024,"sku":"P-24406","price":67.22,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24406_RGB.jpg?v=1781879002"},{"product_id":"collet-set-for-pf-ff230-2-4-5-0-mm","title":"Collet set for PF\/FF230, 2.4 - 5.0 mm (5-piece)","description":"\u003cp\u003eFive piece collet set (not depicted)\\nIncludes 1 each of 2.4 - 3 - 3.2 - 4 and 5mm, for milling cutters. Supplied in a wooden box with sliding lid.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297871892864,"sku":"P-24144","price":99.3,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24144_RGB.jpg?v=1781879002"},{"product_id":"fixed-steady-for-pd-250-e","title":"Fixed steady for PD 250\/E","description":"\u003cp\u003eFixed steady for longer work pieces\\nEspecially for boring. Also required if the tailstock cannot be used to \"counter\". Up to ? 40mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297872679296,"sku":"P-24010","price":86.42,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24010_RGB.jpg?v=1781879005"},{"product_id":"fixed-steady-for-pd-400","title":"Fixed steady for PD 400","description":"\u003cp\u003eFixed steady to support longer pieces for PD 400\\nUsed on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum ? 50mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297875104128,"sku":"P-24404","price":86.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24404_RGB.jpg?v=1781879006"},{"product_id":"collet-chuck-system-plus-10-collets-for-pd400","title":"Collet chuck system plus 10 collets for PD400","description":"\u003cp\u003eFor accurate use on round components. One hardened collet each hardened collet 2 - 3 - 4 - 5 - 6 - 8 - 10 - 12 and 14mm are included. Concentric accuracy better than 0.02mm, much better than a chuck. One soft collet for making a custom size yourself. The included collet attachment is mounted in the place of the headstock chuck. Supplied in a wooden box.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297877070208,"sku":"P-24419","price":403.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24419_RGB.jpg?v=1781879012"},{"product_id":"centre-turning-accessory-for-pd-400","title":"Centre turning accessory for PD 400","description":"\u003cp\u003eIdeal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive\/ face plate with 30mm bore as well as reducing bushes 30\/20mm and 30\/15mm. A threaded drive pin screws into the headstock flange and the drive plate.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297885000064,"sku":"P-24414","price":108.84,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24414_RGB.jpg?v=1781879049"},{"product_id":"mill-drill-head-pf-250-bl","title":"Mill\/drill head PF 250\/BL","description":"\u003cp\u003eIncudes column (? 35 x 400mm), mounting bracket and fastening screws (the PD 250\/E and PD 400 already come with a plane-milled surface). The lathe's top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill\/drill head is identical to the miller FF 250\/BL. Three collets of sizes 6 - 8 and 10mm are included.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297885557120,"sku":"P-24112","price":832.26,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24112_24002_RGB-1.jpg?v=1781879051"},{"product_id":"drill-chuck-0-5-6-5-mm-for-fd-150-e","title":"Drill chuck, 0.5 - 6.5 mm for FD 150\/E","description":"\u003cp\u003eIndustrial quality with high concentricity (allowed up to 10,000rpm). Complete with arbour B 10 x MK 0\/short. For the tailstock of the FD 150\/E.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297885852032,"sku":"P-24152","price":12.17,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24152_RGB.jpg?v=1781879055"},{"product_id":"faceplate-for-pd-400","title":"Faceplate for PD 400","description":"\u003cp\u003eIs fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. ? 125 mm. 2 continuous T-slots. With clamping jaws.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297885917568,"sku":"P-24412","price":198.47,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24412_RGB.jpg?v=1781879055"},{"product_id":"micro-miller-ff-230","title":"Micro-miller FF 230","description":"\u003cp\u003eMICRO Milling machine FF 230\\nThe headstock swivels through 360?, indicated on a scale.\\n\\nHeight is adjusted via a zero adjustable handwheel, also used as fine feed when milling (one revolution equals 1mm travel). The quill and headstock may be locked in position, essential when milling. The powerful motor effects drive via a poly-V belt, yielding high torques, especially at lower speeds. Collets of 6 - 8 and 10mm are included. The solid table is T-slotted to the MICROMOT standard of 12 x 6 x 5mm.\\n\\nOther technical data:\\n230V. 140W. 50\/60Hz. Spindle speeds of 280 - 550 - 870 - 1,200 - 1,500 and 2,200rpm. 30mm travel. Table size 270 x 80mm, column 35 x 400mm long. X-Ytravel is 170 x 65mm. Maximum height 180mm and depth 130mm. Overall height approx. 500mm. Weight approx. 17kg.\\n\\nImportant!\\nFor clean milling we recommend to clamp the quill as well as the headstock onto the column. With the FF 230 this is easily done with the clamp.\\n\\nHandwheel for height adjustment.\\nPoly-V drive system offers 6 speeds between 280 and 2,200rpm.\\nThe fine step feed and the clamps are not included.\\nHandwheels with zero adjustable scale (1 rev = 1.5mm, 1 division = 0.05mm).\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297888047488,"sku":"P-24108","price":1024.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24108_RGB.jpg?v=1781879067"},{"product_id":"mill-drill-attachment-pf-230","title":"Mill\/drill attachment PF 230","description":"\u003cp\u003eMill\/drill head PF 230\\nfor lathe PD 400\\nIncudes column (35 x 400mm), mounting bracket and fastening screws. For mounting on the PD 400. The lathe's top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 5mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill\/drill head is identical to the miller FF 230. Three collets of sizes 6 - 8 and 10mm are included.\\n\\nNote:\\nLathe, milling cutters, work clamps and blocks not included in system.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297888375168,"sku":"P-24104","price":717.02,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24104_RGB.jpg?v=1781879070"},{"product_id":"splash-guard-and-chip-collection-tray-for-fd-150-e","title":"Splash guard and chip collection tray for FD 150\/E","description":"\u003cp\u003eOf 1.5mm thick sheet steel, powder-coated. Bevelled edges at the front and back enable easy cleaning. Pre-drilled mounting holes for the secure stability of the FD 150\/E. L 400 x W 165 x H 140mm. The lathe depicted here is not included in the scope of delivery.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297889522048,"sku":"P-24156","price":126.76,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24156_RGB.jpg?v=1781879078"},{"product_id":"multiple-range-type-er-11-collets-for-fd-150-e","title":"Multiple range type ER 11 collets for FD 150\/E","description":"\u003cp\u003eOffering high concentricity. May be reduced up to 0.5mm below their nominal diameter (intermediate sizes not required). D = 11.5mm, L = 18mm. One each of 2 - 2.5 - 3 - 4 - 5 - 6 and 7mm are included. With clamping nut M 16 x 1. Suitable for the main spindle of the FD 150\/E. Supplied in a wooden box.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297889948032,"sku":"P-24154","price":99.23,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24154_RGB.jpg?v=1781879080"},{"product_id":"gear-chuck-for-pd-250-e","title":"Gear chuck for PD 250\/E (Capacity to 10 mm)","description":"\u003cp\u003eProfessional gear chuck with MK 1\\nFor the tailstock of the PD 250\/E. Capacity up to 10mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297891520896,"sku":"P-24020","price":18.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24020_RGB.jpg?v=1781879091"},{"product_id":"fine-feed-for-ff-500-bl","title":"Fine feed for FF 500\/BL","description":"\u003cp\u003eQuick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297892045184,"sku":"P-24254","price":153.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24254_RGB.jpg?v=1781879093"},{"product_id":"quick-change-tool-post-for-pd-250-e","title":"Quick change tool post for PD 250\/E","description":"\u003cp\u003eQuick change tool post - easy to use!\\nFor quick tool change and easy height adjustment. Includes 2 tool holder elements.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297892372864,"sku":"P-24026","price":102.43,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24026_RGB.jpg?v=1781879095"},{"product_id":"cutter-12-x-3-x-85-mm","title":"Cutter 12 x 3 x 85 mm","description":"\u003cp\u003eSpare tool for parting tool holder (not depicted)\\nAs described above.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297896108416,"sku":"P-24554","price":15.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24554_RGB.jpg?v=1781879115"},{"product_id":"splash-guard-and-chip-collection-tray-for-pd-400","title":"Splash guard and chip collection tray for PD 400","description":"\u003cp\u003eSplash guard and chip collecting tray for lathe PD 400\\nMade from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible. Length 800 x width 270 x height 290mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297896272256,"sku":"P-24402","price":268.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24402_RGB.jpg?v=1781879116"},{"product_id":"self-centering-4-jaw-chuck-for-pd-400","title":"Self centering 4 jaw chuck for PD 400","description":"\u003cp\u003eThe jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297899090304,"sku":"P-24408","price":339.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24408_RGB.jpg?v=1781879123"},{"product_id":"parting-tool-holder-and-tool","title":"Parting tool holder and tool (12 x 3 x 85 mm)","description":"\u003cp\u003eUsed in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297900630400,"sku":"P-24417","price":50.58,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24417_RGB.jpg?v=1781879135"},{"product_id":"4-jaw-chuck-self-centering-for-fd-150-e","title":"4-jaw-chuck, self-centering for FD 150\/E","description":"\u003cp\u003eUsed to clamp cylindrical, square or octagonal work pieces. High accuracy. Clamping range with reversible jaws from 2 - 20mm (inside) and 20 - 50mm (outside). ? 50mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297900695936,"sku":"P-24158","price":68.53,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24158_RGB.jpg?v=1781879135"},{"product_id":"4-jaw-independent-chuck-for-pd-400","title":"4 jaw independent chuck for PD 400","description":"\u003cp\u003eUsed to mount irregularly and asymmetrically shaped objects. Each jaw is adjusted individually and centering is thus achieved manually. Hardened, reversible jaws. Chuck diameter 100mm.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297900794240,"sku":"P-24410","price":182.46,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24410_RGB.jpg?v=1781879136"},{"product_id":"micro-miller-ff-500-bl","title":"MICRO Miller FF 500\/BL","description":"\u003cp\u003eWith variable speed pre-selection from 200 - 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.\\n\\nThe sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range. Solid column with dovetail guides. Milling head can be rotated to the left and right by 90? (with graduation). The clampable spindle sleeve is prepared for mounting of the fine feed adapter NO 24 254. Tool holder using multiple range collets type ER 20: One each of 6 - 8 - 10 and 12mm are included. Height adjustment of milling head via hand wheel. Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm). All 3 hand wheels with graduated scale ring (1 rev. = 2mm).\\n\\nTechnical data:\\n230V. 400W. 50\/60Hz. Spindle speeds 200 - 4,000rpm. Throat 125mm. Sleeve stroke 30mm. Column 120 x 100 x 430mm. Table 400 x 125mm. Transverse range vertical (Z-axis) 220mm, transverse (X-axis) 310mm, depth (Y-axis) 100mm. Dimensions: H = 750mm, W = 550mm, D = 550mm. Weight approx. 47kg.\\n\\nNote:\\nClamping jaws, milling machine and work piece are not included in the scope of delivery.\\n\\nThe Milling machine FF 500\/BL is also available as \"CNC-ready\" version (NO 24 364): With recirculating ball spindles and powerful step motors on all 3 axes.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58297901678976,"sku":"P-24350","price":2496.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24350_RGB.jpg?v=1781879144"},{"product_id":"cnc-control_unit_cu_4","title":"CNC-Control Unit CU 4","description":"\u003cp\u003eFor operating CNC lathes and milling machines with up to four axes. Ready for use, powerful and safe.\\n\\nFree choice of CNC-software: e.g. MACH3\/4 (milling or turning), Estlcam (milling) may be used for operation via parallel-port (if necessary with use of LPT-adaptor). Four powerful micro step drivers (norm-interface SUB-D 9-pole) always provide enough energy for any machining processes. One feedback signal (e. g. limit switch) each for each axis.\\n\\nSwitching relay for 230V-outlet (IEC-socket and protective contact socket) for spindle powering or special functions up to 2,500W.\\n\\nSolid main housing made of 1.2mm steel plates (powder-coated) with large grooved rubber mat for tool storage.\\n\\nTechnical data:\\n230V. 50\/60Hz. Dimensions 330 x 300mm. Height 100mm. Weight approx. 4.5kg. Insulated to class 1.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375838105984,"sku":"P-24900","price":576.18,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24900_Rueckseite_RGB.jpg?v=1784628096"},{"product_id":"micro-miller_mf_70-cnc-ready","title":"MICRO-Miller MF 70\/CNC-ready","description":"\u003cp\u003eWith step motors for axes X (transverse), Y (lengthwise) and Z (high) instead of handwheels.\\n\\nInteresting for users who already own a control unit or would like to purchase one from another provider on the market. Step motors and reference point switch with 2.2m connecting cable and one each standard plug (SUB-D 9-pole) for X, Y and Z axis. Without CNC control unit, without CNC software.\\n\\nOther technical design similar to MICRO Milling machine MF 70. Exception: Larger T-slot table and somewhat longer travel distances X (transverse) and Y (lengthwise).\\n\\nIncluding MICROMOT collets (steel, hardened, triple slit), with 1 each of 1 - 1.5 - 2 - 2.4 - 3 and 3.2mm. The illustrated stepped steel clamping jaws are also included in the delivery.\\n\\nTechnical data:\\n230V. 100W. 50\/60Hz. Spindle speeds 5,000 - 20,000rpm. Table 250 x 70mm. Travel distances: X (transverse) 150mm, Y (lengthwise) 70mm, Z (high) 70mm. Resolution of step motors 0.005mm. Total height 370mm. Weight approx. 7kg.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375839711616,"sku":"P-27112","price":698.65,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/27112_RGB.jpg?v=1784042951"},{"product_id":"multiple_range_collet_set_type_er_16_for_ff_and_pf_250-bl","title":"Multiple range collet set type ER 16 for FF and PF 250\/BL","description":"\u003cp\u003eMultiple range collet type ER-16 (DIN ISO 15488)\\nFor FF 250\/BL and PF 250\/BL. One of each ? 2,4 - 3 - 3,2 - 4 and 5mm. Supplied in a wooden box with sliding lid.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375839744384,"sku":"P-24146","price":69.14,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/proxxon_er16_collet_set_109504_image_1_400.jpg?v=1787826958"},{"product_id":"miller_ff_250-bl","title":"Miller FF 250\/BL","description":"\u003cp\u003eVariable speed pre-selection from 400 - 6.000rpm. Digital speed indication. The headstock swivels through 360?, indicated on a scale.\\n\\n230V-operation. The sophisticated control via rotor position and speed sensors guarantees high torque also in the lower speed range. Tool holder using multiple range collets type ER 16 (DIN ISO 15488). One each of 6 - 8 - 10mm are included. Solid plane-milled steel compound table with 3 continuous T-slots.\\n\\nTechnical data:\\n230V. 250W. 50\/60Hz. Spindle speeds 400 - 6.000rpm. Throat 65mm. Stroke 30mm. Column 35 x 400mm. Table 270 x 80mm. X-travel 170mm, Y-travel 65mm. Dimensions 180 x 130mm. Height approx. 500mm. Weight approx. 17kg.\\n\\nNote:\\nClamping jaws, cutter and work piece are not included in the scope of delivery.\\n\\n\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375839777152,"sku":"P-24114","price":1133.16,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24114_auf-Kreuztisch_Perspektive_RGB-1.webp?v=1787826613"},{"product_id":"automatic_universal_axial_feed_av-e","title":"Automatic universal axial feed AV\/E","description":"\u003cp\u003eAutomatic universal axial feed AV\/E\\nFor the X axis of the Milling machine FF 500\/BL. Will also fit the predecessor compound table KT 400 and the Milling machine FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 - 75mm\/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 ? 260mm\/min). Freewheeling function for manual operation by handwheel. 230V. 100W. 50\/60Hz. Spindle speeds 10 - 130rpm. Dimensions: H 120, W 170, D 210mm. Weight 3.5kg. Insulated to Class 2.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375839809920,"sku":"P-24326","price":428.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24326_montiert_RGB.jpg?v=1784626522"},{"product_id":"precision_lathe_pd_250-e","title":"Precision Lathe PD 250\/E","description":"\u003cdiv class=\"box100pp bgwhite\"\u003e\n\u003ch1\u003ePrecision lathe PD 250\/E\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eFor face, longitudinal and taper turning, thread-cutting.\u003cbr\u003eFor machining steel, brass, aluminium and plastic.\u003cbr\u003eMounting flange for fastening the mill\/drill head PF 230.\u003cbr\u003e\u003cbr\u003eCentre distance 250mm. Swing 70mm. Height over cross slide 43mm.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"box50lpp\"\u003e\n\u003cp\u003e\u003cstrong\u003eMachine bed:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOf cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill\/drill head PF 230. Covered lead spindle.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadstock:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOf die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1\/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm\/rev.).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTailstock:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOf die-cast aluminium. Sleeve Ø 18mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSupport:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDrive:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eQuiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLathe chuck:\u003c\/strong\u003e\u003cspan\u003e High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHandwheels:\u003c\/strong\u003e\u003cspan\u003e Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThread cutting device:\u003c\/strong\u003e\u003cspan\u003e With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther technical data:\u003c\/strong\u003e\u003cspan\u003e 230V. 50\/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375843185024,"sku":"P-24002","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24112_24002_RGB.jpg?v=1785250223"},{"product_id":"er_20_collet_set_for_ff_500-bl_24_to_50mm","title":"ER 20 collet set for FF 500\/BL, 2.4 to 5.0mm (5-piece)","description":"\u003cp\u003eFor the Milling machine FF 500\/BL. But also for older versions of the Mill\/drill head PF 400 (from production no. 401-10910) and of the Milling machine FF 500 (from production no. 5648). High concentricity and repeat accuracy. May be reduced to 0.5mm below their nominal diameter (intermediate sizes not required). D = 21mm, L = 31.5mm. One each of 2.5 - 3 - 3.5 - 4 and 5mm are included. Supplied in a wooden box with sliding lid.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375843217792,"sku":"P-24253","price":67.27,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/proxxon-24253.jpg?v=1784633549"},{"product_id":"self_centering_3_jaw_chuck_for_pd_400","title":"Self centering 3 jaw chuck for PD 400","description":"\u003cp\u003e\u003cstrong\u003eSelf-centering 3-jaw chuck\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eIdentical to the lathe chuck of lathe PD 400. Capacity through reversing chucks 3 - 100mm.\u003c\/span\u003e\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375843283328,"sku":"P-24407","price":294.82,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24407.jpg?v=1785246910"},{"product_id":"quick_change_tool_post_for_pd_400","title":"Quick change tool post for PD 400","description":"\u003cp\u003e\u003cstrong\u003eTool post\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eIncluding two holders. Provides quick tool changes with easy height adjustment. For turning tools 10 x 10mm.\u003c\/span\u003e\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375843479936,"sku":"P-24415","price":96.04,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24415.jpg?v=1785249352"},{"product_id":"precision_lathe_pd_400-cnc-ready","title":"Precision lathe PD 400\/CNC-ready","description":"\u003ch1\u003ePrecision lathe PD 400\/CNC-ready\u003c\/h1\u003e\n\u003cp\u003eInteresting for users who already own a control unit or would like to purchase one from another provider on the market.\u003cbr\u003e\u003cbr\u003eAxes drive with powerful step motors and recirculating ball spindles (no backlash). For facing and longitudinal turning, for turning balls, radii and any freely formed contours made of steel and nonferrous metal.\u003cbr\u003e\u003cbr\u003eOtherwise, the mechanical design is almost identical to the proven PROXXON precision lathe\u003cspan\u003e \u003c\/span\u003ePD 400.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375843545472,"sku":"P-24504","price":3393.06,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/24504_1.jpg?v=1785250079"},{"product_id":"universal_milling_system_uf-e","title":"Universal milling system UF\/E","description":"\u003ch1 class=\"\"\u003eUniversal milling system UF\/E\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e230V-operation (no additional controller needed).\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eVariable speed pre-selection from 10,000 to 30,000rpm and digital speed indication. The sophisticated control via rotor position and speed sensors guarantees high torque also in the lower speed range. Machine base made of die-cast aluminium with 20mm MICROMOT standard collar and 43mm European standard spindle collar. Triple ball bearing spindle for high concentric accuracy and smooth running.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cimg src=\"https:\/\/www.proxxon.com\/en\/images\/produkte\/20200_spannzangen.png\" alt=\"\" width=\"120\" height=\"68\" border=\"0\" align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e \u003c\/p\u003e\n\u003cp class=\"\"\u003e \u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eTechnical data:\u003cbr\u003e\u003c\/strong\u003e230V. 50\/60Hz. 250W. 10,000 - 30,000rpm. Weight 1,200g. Includes three ER11 collets according to DIN\/ISO in sizes 2.5 - 3.2 (1\/8\") and 6mm.\u003c\/p\u003e\n\u003ch2\u003eFields of application for Universal milling system UF\/E\u003c\/h2\u003e\n\u003cp class=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/www.proxxon.com\/en\/images\/produkte\/20200_1.png\" width=\"220\" height=\"220\"\u003e\n\u003cfigcaption\u003eOn CNC-routers.\u003cbr\u003e\u003cbr\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/www.proxxon.com\/en\/images\/produkte\/20200_2.png\" width=\"220\" height=\"220\"\u003e\n\u003cfigcaption\u003eOn Mill\/drill unit\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.proxxon.com\/en\/micromot\/20000.php\" title=\"\"\u003eBFB 2000\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand compound table\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.proxxon.com\/en\/micromot\/20150.php\"\u003eKT 150\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/www.proxxon.com\/en\/images\/produkte\/20200_3.png\" width=\"220\" height=\"220\"\u003e\n\u003cfigcaption\u003eOn drill stand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.proxxon.com\/en\/micromot\/28600.php\"\u003eMB 200\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand compound table\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.proxxon.com\/en\/micromot\/27100.php\"\u003eKT 70\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/www.proxxon.com\/en\/images\/produkte\/20200_4.png\" width=\"220\" height=\"220\"\u003e\n\u003cfigcaption\u003eMICROMOT-adapter in combination with the millers \u003ca href=\"https:\/\/www.proxxon.com\/en\/micromot\/24350.php\"\u003eFF 500\/BL\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand FF 500\/BL-CNC.\u003cbr\u003e\u003cbr\u003e\u003ca class=\"fancybox\" href=\"https:\/\/www.proxxon.com\/en\/images\/produkte\/lightbox\/20200.png\" title=\"\" data-caption=\"PROXXON Universal milling system UF\/E\"\u003e\u003cimg src=\"https:\/\/www.proxxon.com\/en\/images\/produkte\/20200.png\" id=\"20200\" class=\"p55 d30\"\u003e\u003c\/a\u003e\u003cbr class=\"dnp\"\u003e\u003cbr class=\"dnp\"\u003e\n\u003col\u003e\n\u003cli\u003eDigital speed indication.\u003c\/li\u003e\n\u003cli\u003eVariable speed pre-selection.\u003c\/li\u003e\n\u003cli\u003eMaintenance-free, brushless DC-motor for spindle speeds from 10,000 - 30,000rpm.\u003c\/li\u003e\n\u003cli\u003ePrecisely machined die-cast aluminium housing offering exact ball-bearing seats.\u003c\/li\u003e\n\u003cli\u003e43mm collar (European standard).\u003c\/li\u003e\n\u003cli\u003eStandard 20mm MICROMOT collar.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":58375843578240,"sku":"P-20200","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/files\/20200_RGB.jpg?v=1785231278"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/7429\/4656\/collections\/24350_RGB.jpg?v=1784028621","url":"https:\/\/www.tomaco.co.uk\/collections\/precision-lathe-and-milling-systems.oembed","provider":"Tomaco","version":"1.0","type":"link"}