Manpa 2″ Circular Cutter 12mm

TECHNICAL SPECIFICATIONS
​• Model :   MP21-2-12
​• ​Max. Blade Diameter :   45 mm​
​• Max. Carving Depth :   10 mm @ 2” Blades
​• Max. RPM :   16,500 rpm @ extension spindle
​• Power :   630 ~750 Watt
​
​• Disc Bore Size:   9.5 mm
​• Weight :   0.13 Kg (without angle grinder)
​• Overall Length :   –
​• Working Width :   10 mm @ 2” Blades
​• Blade Width :   12 mm 
​• Number Of Teeth :   3 EA @ 2” Blades

Angle Grinder : Spindle Size &  Model
Angle grinder is not included.
Please check your “Spindle size” of angle grinder.
​M10 : Aisa
M14 : EU
5/8″-11 : U.S.A, CANADA

Features

① Dimension 
– Blade diameter : 45mm
– Blade thickness : 12mm
​
② Replaceable Tungsten Carbide
– Easy to change when worn
– Circular type for carving any multiple direction.

Power Carving Performance. 12mm Sharp tungsten carbide can carve the wood like butter with easily.

2″ Type of cutter can only fit to 2″ Belt cutter Version : Bare tool, Basic and Master kit.

What’s Included

2″ Circular Cutter 12mm Contents

​① 2” Circular Cutter 12mm
② Star Wrench

Precautions

– Please read and follow all safety instructions carefully. Please keep the manual for future reference.  

 –  When operation, always wear safety equipment such as face masks and safety goggle.

 – Always secure the workpiece securely when working. 

 – Make sure that the grinder switch is off before plugging in the power cord.

 – Be careful not to touch the cutter blade. Serious injury may result.

 – Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.

 – When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.

 – After operation, turn off the switch and set it down when The remaining rotation stop completely.

 – Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.

 – Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.

Maintenance

– Inspect and tighten the bolts of each part before operation.
 
– After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
 
​- If the cutter blade or belt is worn out, replace it with a new one.