Specifications
Model : MP21-13-2
Max. Depth : 150 mm
Max. Sanding RPM : 8000 rpm
Power : 630 – 740 watt
Disc Bore Size : M10 (Special Adapter needed)
Weight : 0.07 kg
Overall Length : 150mm.
Features
Direct Angle Grinder
Assistant Tool 2 can only be installed in Angle Grinder Directly (Special Adapter needed).
Flap Sanding Type
It can use Cloth Sanding. Users can customize the size and hold it half. Then, can put it on the separated part on the top.
Roll Sanding Type
It can use Cloth Sanding. Users can customize the size and roll the paper and put it on the separated part on the top.
M10 thread
Assistant Tool 2 has its M10 thread.
It needs a Special adapter for using on angle grinder directly.
Must Know
Appropriate RPM
Depending on purpose, users need to change the appropriate RPM for the best use.
Two Hands Grip
Must use the right grinder and Grab the tools with two hands for safety.
Special adapter is needed
Sanding Tool has M10 thread. Check your spindle size and prepare the special adapter for use.
What’s Included
Main Component
① Assistant Tool 2 -150mm
Precautions
– Please read and follow all safety instructions carefully. Please keep the manual for future reference.
– When operation, always wear safety equipment such as face masks and safety goggle.
– Always secure the workpiece securely when working.
– Make sure that the grinder switch is off before plugging in the power cord.
– Be careful not to touch the cutter blade. Serious injury may result.
– Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.
– When using the tool, always adjust the appropriate RPM.
– After operation, turn off the switch and set it down when The remaining rotation stop completely.
– Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.
– Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.
Maintenance
– Inspect and tighten the bolts of each part before operation.
– After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
- If the cutter blade or belt is worn out, replace it with a new one.
Reviews
There are no reviews yet.