Dowel Drill Hw D=12X44X77 S=10X30 Lh

2 Flute Dowel Drills

THROUGH HOLE DOWEL DRILL HW D=12,7 X35X70 RH

2 Flute Through Hole Dowel Drills

Dowel Drill Hw S=10X27 D12X50X85 Lh

4 Flute Dowel Drills

THROUGH HOLE DOWEL DR. HW S=10X30 D=8X70x115 LH

4 Flute Through Hole Dowel Drills

Loose Countersink Hw Z2 D=20 D=5-10 Lh

Countersinks for 2 Flute Dowel Drills

Loose Countersink Hw Z2 D=16 D=4 Rh

Countersinks for 4 Flute Dowel Drills

Hinge Boring Bit "Dp" D=15X57,5 S=10X20 Rh

Diamond Hinge Boring Bits

Hw Dowel Drill W/Countersink D=10X13X70 S=10X40 Lh

Dowel Drills with Countersink

Dowel Drill Hw D= 6X50 S=M10/30 Lh

Dowels with Threaded Shank

Dowel Drill W/C.Sink Hw D= 5X20 S=M10/11 Lh

Dowels with Threaded Shank and Countersink

GRINDING WHEEL 125x5.5x20 A=50/50° FOR BIT XTREME D=3-7

Grinding Wheels for Xtreme Dowel Sharpening

Hinge Boring Bit Hw D=35X77 S=10X30 Lh

Hinge Boring Bits

Hinge Boring Bit With Chipbreaker Hw S=10X26 D=35X70 Z2+2R L

Hinge Boring Bits with Chipbreaker

Adaptor S=M10/30 D=10 Lh

Shank Adaptors and Holders

COUNTERSINK HWM Z3 S=10 D=19.5X9X70 RH

Solid Carbide Countersink

SPIRAL BIT D=5X28X60 LH HM INT

Solid Carbide Dowel Drills

Solid Carbide Twist Drills D=2.5X27X57 Rh

Solid Carbide Twist Drills Negatively Ground

Solid Carbide Twist Drill 60? D=3X27X55 Rh

Solid Carbide V Point Twist Drills

DOWEL DRILL W/COUNT.SINK FOR THROUGH HOLES HW S=10x20 D=10x35x70 LH

Through Hole Dowel Drills with Countersink

XTREME HINGE BORING BIT HW S=10x26 D=15X57.5 LH

Xtreme Hinge Boring Bits

Dowel Drill Hw Smg D= 5 X27X57,5 S=10X27 Rh

Xtreme Long Life Dowel Drills

Xtreme Dowel Drill T.H. Hw S=10X26 D=5X70 Rh

Xtreme Long Life Through Hole Dowel Drills

Dowel Drill Hw D=11 X35X70 S=10X30 Lh

Xtreme Solid Carbide Dowel Drills

2 FLUTE DOWER DRILL HWM S=10X25 D=10X35X70 RX

Xtreme Solid Carbide Through Hole Dowel Drills

Skip to results list
793 items

Filter