Titebond Speed Set Wood Glue

Titebond Speed Set Wood Glue is an extremely fast-setting, high solids PVA adhesive. It provides exceptional gap filling properties developing a bond stronger than the wood itself. This product offers excellent sandability, unaffected by finishes, and increases productivity through its shorter clamp time with no increase in viscosity. Titebond Speed Set cleans up with water.

Features & Benefits

Extremely fast set – 15 minute clamp time

Excellent strength & durability

Visible under black light

Unaffected by finishes

Heat resistant – Sands easily

Easy water cleanup

Application Guidelines

Application Temperature:

Above 59°F

Open Assembly Time:

2-4 minutes (70°F / 50% RH / 8% MC)

Total Assembly Time:

8-10 minutes (70°F / 50% RH / 8% MC)

Minimum Required Spread :

Approximately 6 mils or 250 square feet per gallon

Required Clamping Pressure:

Use only enough pressure to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).

Method of Application:

Any method can be used for spreading as long as Open and Total Assembly Times are met (see above).

Cleanup:

Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations:

Titebond Speed Set Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 59°F. Do not Freeze. Agitate adhesive monthly to reduce product settling. Adhesive is extremely fast setting. It is important to follow Assembly Time recommendations. Minimum clamp-time is 15 minutes. Longer clamp times may be beneficial. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

Type Aliphatic resin emulsion

Calculated VOC < 6 g/L

State Liquid emulsion

Weight Per Gallon 9.3 lbs.

Color White

Dried Film Translucent

Flashpoint >200°F

Solids 60%

Viscosity 3,600 cps.

Freeze / Thaw Stability Not stable

pH 4.7

Chalk Temperature To assure a good bond, 59°F is the lowest recommended temperature for the glue, air and materials during application and drying.

Storage Life 24 months in tightly closed containers at 75°F. For best results, mix glue every 30 days to reduce settling.

Bond Strength ASTM D-905 (On Hard Maple)

SPECIFICATIONS

• CONFORMS TO ASTM D-4236

Download Literature

Titebond Speed Set Wood Glue - FF1242